The suction flow rate of portable medical suction machine AVERLAST 25 reaches 25L / min, and the ultimate negative pressure reaches 0.08Mpa, which is suitable for the nursing process of sucking a large amount of liquid and quickly processing before and after surgery. Portable medical suction machine AVERLAST 25 uses an innovative inline integrated suction bottle. This could be its Unique advantages, because the filter of this machine can be directly inserted into the machine body or bottle cap. The bottle and the machine body can be pushed and pulled to achieve a perfect combination, which is very convenient to operate.
1. low noise, oil free,
2. complete ABS plastic body,
3. embedded 1400ml suction bottle,
4. direct docking system,
5. double security overflow protection,
6. exquisite size,
7. lightweight and more convenient installation.
Other advantages
1) AVERLAST 25, as a portable suction unit, has only one air inlet, which matches the supplied hose. The user only needs to connect a hose to perform the suction operation.
However, traditional products that existing in market now have inlet and outlet of the same size, which are not easy to understand. The number of hoses and the number of connection steps can easily cause the user to not know which hose should be connected to which interface. They may cause the primary anti-overflow protection to fail after being installed in reverse use, causing the risk of damage to the air pump.
2) The filter provided by AVERLAST 25 can be reused multiple times. As secondary protection, if the liquid has been soaked, it can be washed, disinfected and dried before being used again.
Traditional filters that used on other existing suction machines cannot be used any more once they are contaminated and wet, and must be disposed.
System Map | Functions | AVERLAST 25 |
Pump Driving System | Max. Air Flow | 25L/min |
Max. Vacuum Pressure | 0.08Mpa | |
Work Mode | Intermittent Run | |
Bottle System | Max. Jar capacity | 1400ml |
Overflow Protection | Double Safety Protection | |
Innovative Filter | Waterproof Reusable | |
Inlet Cover | One only, and no need outlet | |
Operate System | Vacuum Gauge Range | 0.00Mpa ～ 0.1Mpa (0psi ～14psi) |
Vacuum Control Range | 0.02Mpa ～ 0.08Mpa | |
Suction Hose Hang Groove | One, at the left | |
Wall mounted Hang Tip | Two, at the back | |
Hidden Rotatable Handle | Yes, at the top | |
3 Safety System | Floating method | First level stop overflow |
Filter method | Second level stop overflow | |
Overheated Protection | Yes | |
Electrical System | Power Consumption | 130 W |
Adapter Power | / | |
Lithium Batteries (If new) | / | |
Ambulance Car Adapter | / | |
Auto Power off | Every 30 minutes | |
Power Fuse | 1.0 A -φ5×20mm | |
Noise Level | <50dB(A) | |
Packaging Details | Machine Body Size | 283x195x273mm |
Import Carton Size | 415x360x300mm for 2 units | |
Net Weight per Unit | 3.75kg | |
Import Gross Weight per Carton | 9.8 kg | |
Operating Condition | Operating Temperature | 41℉ to 104℉ (5℃ to 40℃) |
Operating Humidity | 10% to 90% RH | |
Operating Atmospheric Pressure | 700-1060hpa | |
Storage Temperature | -4℉ to 131℉ (-20℃ to 55℃) | |
Storage Humidity | 10 to 95% RH |
Rechargeable Portable Suction Unit (AC, DC, Built-in Batteries) AVERLAST 25B AVERLAST 25B rechargeable portable suction unit has a built-in lithium battery, charger, and in-vehicle interface. It drives over 25liter vacuum flow continuously. Under the support of built-in lithium battery, the AVERLAST 25B operation environment can not only be used indoors, but also used for short-term outdoor applications after it is full charging. It can also be connected to ambulances, family cars and other vehicles as it comes along with an in-vehicle interface (car lighter power cord). Can be used indoors, outdoors, and in cars.
1. Powerful suction up to 0.08Mpa @ 25LPM
2. Double anti-overflow protection system
3. Direct Plug-in Bottle System, only one push to take out bottle
4. 1400ml capacity suction bottle
5. Innovative filter technology prevents penetration of micro organisms and secretion into the device
6. Only one inlet for suction hose, avoid misleading of air inlet and outlet
7. Easy clean & sterilize & user-friendly operations
System Map | Functions | AVERLAST 25B |
Pump Driving System | Max. Air Flow | 25L/min |
Max. Vacuum Pressure | 0.08Mpa | |
Work Mode | Continuously Run | |
Bottle System | Max. Jar capacity | 1400ml |
Overflow Protection | Double Safety Protection | |
Innovative Filter | Waterproof Reusable | |
Inlet Cover | One only, and no need outlet | |
Operate System | Vacuum Gauge Range | 0.00Mpa ～ 0.1Mpa (0psi ～14psi) |
Vacuum Control Range | 0.02Mpa ～ 0.08Mpa | |
Suction Hose Hang Groove | One, at the left | |
Wall mounted Hang Tip | Two, at the back | |
Hidden Rotatable Handle | Yes, at the top | |
3 Safety System | Floating method | First level stop overflow |
Filter method | Second level stop overflow | |
Overheated Protection | Yes | |
Electrical System | Power Consumption | 55W |
Adapter Power | AC 220~240V Input, DC 12V Output | |
Lithium Batteries (If new) | 1 set, DC 12V | |
Ambulance Car Adapter | DC 12V | |
Auto Power off | Every 2 hours | |
Power Fuse | 5.0 A -φ5×20mm | |
Noise Level | <50dB(A) | |
Packaging Details | Machine Body Size | 283x195x273mm |
Import Carton Size | 415x360x300mm for 2 units | |
Net Weight per Unit | 3.5 kg | |
Import Gross Weight per Carton | 9.7 kg | |
Operating Condition | Operating Temperature | 41℉ to 104℉ (5℃ to 40℃) |
Operating Humidity | 10% to 90% RH | |
Operating Atmospheric Pressure | 700-1060hpa | |
Storage Temperature | -4℉ to 131℉(-20℃ to 55℃) | |
Storage Humidity | 10 to 95% RH |
